[Steve]

Part 3

Spray effects...

8) Take cotton ball


And pinch a little between your fingers and pull it carefully away (keeping it attached)


Keep going back to the ball itself and repeating until you have a lengthy, wispy looking piece of cotton.


9) Place on the fall. Move it around and see where you like it. It should stick on its own, at least temporarily,(if not use a FEW TINY SPOTS of white glue to help).
Make as many as necessary and don’t forget about the sides of the waterfalls (this really helps make it look like the water has volume and isn’t flat!)

10) Once everything is where you want it…spray with hairspray (a few light coats are better than one heavy…bet you heard that before…LOL)
Sometime in the future the cotton may become dusty or discolored…you can always pull the cotton off and replace it….good as new!
Looks good in person….looks good in pictures!


This last pic was taken by the friend I made the waterfall and diorama for



There are many ways to do one of these...this is ONE way
But I will say one thing for this method...It is very easy and almost "Steve Proof"!